BESA Industrial Coatings

All products and systems have been tested in accordance with ISO 12944 NORM. Test certificates and results are available upon request. Voc compliant and non compliant status is based on the current standards for the automotive refinishing market.

BesmanIndustryLineup

Industrial Systems:

  1. F292 Zinc Flake Epoxy Primer + Urki Nato Polyurethane Topcoat
  2. F294 Zinc Phosphate Epoxy Primer + Urki Nato Polyurethane Topcoat
  3. F350 High Build Epoxy Primer + Urki Nato Polyurethane Topcoat
  4. Besa Nato Polyurethane Topcoat; Direct to Metal (DTM) Steel, Aluminum, Galvanized, Bronze, Brass, Glass, and Plastics

VOC Compliant Systems:

  1. F292 Zinc Flake Epoxy Primer + Urki Voc Polyurethane Topcoat
  2. F293 Zinc Phosphate Epoxy Primer + Urki Voc Polyurethane Topcoat
  3. F350 High Build Epoxy Primer + Urki Voc Polyurethane Topcoat
  4. Alfa Pur 3795 DTM Polyurethane Topcoat

URKIVOC (VOC Compliant) Topcoat besa_product_urki
For the painting and refinishing of vehicles, industrial vehicles and machinery in a low VOC systems, elasticity, body, gloss, and outdoor resistance.

URKINATO – Polyurethane Enamel Topcoat

  • Designed for painting machinery, industrial vehicles, structures and tanks for interior and exterior use
  • Excellent qualities with regards to hardness, elasticity, resistance to abrasion and aggressive agents

BESANATO – Polyurethane Enamel Topcoat

  • Direct adhesion (DTM) on a variety of surfaces: Steel, Stainless Steel, Aluminum, Brass, Galvanized, Glass, Plastics, ABS, PUR, PC, MA, GRP, PVC, Ceramics
  • 2K Single-coat acrylic enamel
  • Does not yellow

BESANATO SAT – Polyurethane Enamel Satin Finish Topcoat

  • Direct adhesion (DTM) on a variety of surfaces: Steel, Stainless Steel, Aluminum, Brass, Galvanized, Glass, Plastics, ABS, PUR, PC, MA, GRP, PVC, Ceramics
  • 2K Single-coat acrylic enamel
  • Does not yellow

F-294 Zinc Phosphate Epoxy Primer

  • Direct to steel, aluminum, galvanized
  • Pigmented with Zinc Phosphate
  • Suitable for wet on wet use
  • Very High anticorrosion protection
  • 720 Hours salt spray protection
  • 4-6mils build in 2 coats
  • 45 min to 1 Hr Topcoat time
  • Mix 3:1 – Reduce 10%

F-350/2 Epoxy Primer (VOC Compliant)

  • Direct to Metal (DTM) adhesion
  • Formulated with anticorrosion pigments
  • More than 200 my can be achieved with each coat
  • Recommended for metallic structures, machinery, equipment, and for processes demanding a high anticorrosion power
  • Compliant for automotive refinishing